Free shipping (**Additional shipping charges for Hokkaido and Okinawa)
For more information, please see the Shipping tab and Shipping Policy.
Product Description
This is a customizable training rack created as an original project by MBC POWER. The main frame is made of steel pipes with an outer diameter of 75 mm x 75 mm and a thickness of 3 mm, and is combined with large bolts with a diameter of 20 mm to achieve extremely high durability and rigidity equivalent to North American commercial grade products. The laser-cut holes, finely engraved into the base and the sides of the support posts, maximize the freedom of expansion through attachments, allowing each user to customize it to suit their individual environment and purpose. The support parts are finished with a durable powder coating and are available in three colors: black, gloss red, and camo. You can also choose supports made of stainless steel, which has become increasingly popular in North America in recent years. While providing the same functionality, rationality, design, and expandability as North American-made racks, we have manufactured them with specifications and sizes that make them easy to install in Japanese buildings (210cm tall) and easy to use for Japanese people.
For details on the MBC original rack, please refer to the page about MBC original equipment. This page lists optional parts currently being produced and FAQs.
specification
Shipping
This product will be delivered by Seino Transportation. Delivery will be to your doorstep. Seino Transportation delivery staff cannot carry or set up the product inside the building. Deliveries to condominiums, buildings, and apartment buildings will generally be made at the first floor entrance. In addition, if the delivery address is in an area where Seino Transportation cannot deliver, or is located at the back of an alley where a 4-ton truck cannot enter, the item will be handed over at the nearest Seino Transportation office. If you purchase other products at the same time, they may be delivered separately from this product by Yamato Transport, Japan Post, Sagawa Express, etc.
[Shipping size and packaging weight] MBC's original racks divide boxes into as small pieces as possible for transportation into condominiums and apartments. For a 210cm rack, the largest box with the support poles stored is 205cm x 30cm x 9cm, and for a 180cm rack, the largest box with the support poles stored is 175cm x 30cm x 9cm. It is not normal for a product to not fit into an elevator or pass through a door when delivered. The heaviest box weighs approximately 30kg.
[About specifying delivery date and time]
*For private homes For deliveries of large free weight equipment to private residences, it is not possible to specify a delivery date and time as the delivery company, Seino Transportation (Kangaroo Delivery), does not currently accept requests for specific delivery dates and times to private residences. Therefore, the item will be shipped without a specified date and time, but the delivery date and time can be adjusted to some extent by contacting the nearest Seino Transportation office after the item has been shipped and making arrangements. When delivering free weights to private homes, if the recipient is not at home and a second delivery is required, this places a heavy burden on the delivery staff. Therefore, if you are often not at home, we ask that you make arrangements to receive the item beforehand if possible.
・Meeting method After the product has been shipped, please contact the nearest Seino Transportation office by phone and provide the inquiry number and the date and time that you can receive the product. The delivery store can be confirmed using the confirmation URL that will be sent to you via email when the product is shipped.
We have also asked Seino Transportation to contact the recipient by phone before delivery, but the sooner the recipient contacts us the easier it will be to arrange the desired date and time.
After placing your order, if you specify a convenient delivery date, we will ship the product a few days before that date so that it can be delivered at the specified date and time.
*For stores and corporations You can only specify the date of delivery; you cannot specify the desired delivery time.
*Seino Transportation Office stop When placing an order, please enter the address and name of your nearest Seino Transportation office in the designated field on the delivery address input page. The storage period at the branch office is 10 days from the date of arrival.
[About warranty] MBC original rack equipment is sold with a 5-year warranty against manufacturing defects and a 30-day money back guarantee. You may return any product for any reason within 30 days of delivery, even if it has been opened or used. We also stock spare parts so that if any defective products are found, we can quickly replace them on a part-by-part basis. *Please contact us in advance by email or phone when returning an item. *When returning a product, please be sure to repackage it in the original packaging it was delivered in. *The outer packaging will be required for returns or exchanges, so please keep it for 30 days after the product arrives. If the outer packaging has been discarded, returns will not be possible. In addition, when returning a defective product for exchange, you will need to pack it yourself. Under no circumstances will we be able to send you outer packaging or packaging materials for repackaging. *If you return the product for your own reasons, you will be responsible for the original shipping fee, return shipping fee, refund fee, and payment fee. *For products other than MBC original racks (even if purchased together with MBC original racks), we cannot accept returns or exchanges after opening unless there is an unavoidable reason such as a defective product.
Assembly Method
Tools required for assembly
- 1 pair of 30mm wrenches or spanners - 1 pair of 19mm wrenches or spanners ・(Plate-Loaded Lat Pulldown/Low Row Attachment) 17mm wrench or spanner ・(Smith attachment) 10mm hex wrench ・Stepladder (or large footstool) 1 unit
The product comes with an assembly manual, but please be sure to check the assembly instructions page at the link below before assembling the product.
For details about MBC original racks,please also refer to theMBC original equipment page. This page lists optional parts currently in production and FAQs.
Currently in construction.
From here↓
[Fully customizable rack with freely combinable parts]
MBC original racks are designed and sold as fully customizable racks that can be freely customized by selecting the shape and parts and adding attachments. Please select the following items when placing your order. (For other attachments, please order from each product page.)
Please select the rack type from four types: "Type 1", "Type 1.5", "Type 2", and "Type 2.5".
Type 1
Type 1.5
Type 2
Type 2.5
This is the basic form of squat stand. We have achieved a compact size and depth while still ensuring sufficient stability and safety. Since it is the same size base as the "Power Rack Standard 210cm Type 1", By purchasing conversion parts It can be converted to a "Power Rack Standard 210cm Type 1".
This model is compatible with Type 1 adjustable bench. Strengthening the bolt connection at the bottom of the pillar, By using the "Logo Plate Cross Member", The bottom cross member has been eliminated. By purchasing conversion parts It can be converted to a "Power Rack Standard 210cm Type 1".
The larger base, which is extended 4cm forward and 9cm rearward compared to Type 1, provides greater stability. "Half Rack Standard 210cm Type 1", "Half Rack Standard 210cm Type 1.5", Since it is the same size base as the "Power Rack Standard 210cm Type 2", It is possible to convert to these racks by purchasing conversion parts.
This model is compatible with Type 2 adjustable benches. "Half Rack Standard 210cm Type 1", "Half Rack Standard 210cm Type 1.5", Since it is the same size base as the "Power Rack Standard 210cm Type 2", It is possible to convert to these racks by purchasing conversion parts.
Type 1
This is the basic form of squat stand. We have achieved a compact size and depth while still ensuring sufficient stability and safety. Since it is the same size base as the "Power Rack Standard 210cm Type 1", By purchasing conversion parts It can be converted to a "Power Rack Standard 210cm Type 1".
Type 1.5
This model is compatible with Type 1 adjustable bench. Strengthening the bolt connection at the bottom of the pillar, By using the "Logo Plate Cross Member", The bottom cross member has been eliminated. By purchasing conversion parts It can be converted to a "Power Rack Standard 210cm Type 1".
Type 2
The larger base, which is extended 4cm forward and 9cm rearward compared to Type 1, provides greater stability. "Half Rack Standard 210cm Type 1", "Half Rack Standard 210cm Type 1.5", Since it is the same size base as the "Power Rack Standard 210cm Type 2", It is possible to convert to these racks by purchasing conversion parts.
Type 2.5
This model is compatible with Type 2 adjustable benches. "Half Rack Standard 210cm Type 1", "Half Rack Standard 210cm Type 1.5", Since it is the same size base as the "Power Rack Standard 210cm Type 2", It is possible to convert to these racks by purchasing conversion parts.
Please choose from four post colors: "Black," "Gloss Red," "Camo," and "Stainless Steel."
black
Gloss Red
Camo
stainless
black
Gloss Red
Camo
stainless
The color selection for the support pillars has only been changed for the vertical supports; parts other than the vertical supports (base, horizontal supports, etc.) remain black.
Features of stainless steel posts -Made of stainless steel, which is extremely resistant to rust and has no risk of paint peeling off -Embossed metal surface is scratch and stain resistant and has a luxurious feel
*Note regarding stainless steel posts: Please be aware that since the stainless steel posts are unpainted exposed metal parts, there may be tiny scratches and dents due to laser cutting and welding.
Please choose from two types of cable attachment: "None" or "Plate-Loaded Lat Pulldown/Low Row". Depending on the rack type, some attachments cannot be selected.
No cable attachment
Plate-loaded lat pulldown/low row
You can order just the squat stand portion without the cable attachment. Once you purchase only the squat stand, It is also possible to add a cable attachment later. In that case, please refer to the individual product page. Please purchase the missing parts. To individual product page
The operating noise of moving parts such as pulleys and bushings has been kept as low as possible, making it ideal for use in a home gym. Please select the option with or without leg roller attachment. To individual product page
No cable attachment
You can order just the squat stand portion without the cable attachment. Once you purchase only the squat stand, It is also possible to add a cable attachment later. In that case, please refer to the individual product page. Please purchase the missing parts. To individual product page
Plate-loaded lat pulldown/low row
The operating noise of moving parts such as pulleys and bushings has been kept as low as possible, making it ideal for use in a home gym. Please select the option with or without leg roller attachment. To individual product page
Please select the Smith attachment from "without Smith" or "with Smith". Only rack type 2 and type 2.5 can be installed.
No Smith
With Smith
You can order only the Squat Stand Type 2 and Type 2.5 parts without the Smith Machine attachment. You can also purchase just the squat stand and then add the Smith attachment later. In that case, please purchase the Smith attachment and bottom stabilizer. (If you use Smith without a bottom stabilizer, the rack will spread out. Smith's guide rods may become distorted.)
By adding it to the rack, you can squat with the Smith machine, Bulgarian squat, lunge, military press, back press, You can do exercises such as bench press and incline bench press. This product is designed with commercial-level strength and comes with a 30mm diameter sliding rod. By combining two pairs of large linear bushings, high rigidity and smooth movement are achieved. To individual product page
No Smith
You can order only the Squat Stand Type 2 and Type 2.5 parts without the Smith Machine attachment. Once you purchase only the squat stand, This is for those who want to add a Smith attachment later. When adding a Smith attachment, Please purchase the bottom stabilizer together. *If you use Smith without a bottom stabilizer, the rack will spread out. Smith's guide rods can become warped.
Smith Yes
By adding it to the rack, you can do Smith machine squats, Bulgarian squats, Lunge, military press, back press, You can do exercises such as bench press and incline bench press. This product is designed with commercial-level strength. With a sliding rod of 30 mm diameter By combining two pairs of large linear bushings, high rigidity and smooth movement are achieved. The bar diameter is 30mm and the initial weight is 22.5kg. The Narl mark is engraved at 40.5cm and 45.5cm from the center. To individual product page
Please choose from four types of pull-up bars: "Single Pull-Up Bar," "110cm Top Cross Member," "Logo Plate Cross Member," and "Top Mount Pull-Up Bar." Selection may not be possible depending on the cable attachment.
A part that combines a cross member and a single pull-up bar. The rack has increased expandability and can also be used for chinning. To individual product page
Wide grip, narrow grip, It is compatible with various variations of chinning, such as parallel grip. Go to individual product page . *Cannot be installed at the same time as the "Plate-Loaded Lat Pulldown/Low Row Attachment."
A part that combines a cross member and a single pull-up bar. The rack has increased expandability and can also be used for chinning. To individual product page
Top Mount Pull Up Bar
Wide grip, narrow grip, It is compatible with various variations of chinning, such as parallel grip. To individual product page ※ Plate-loaded lat pulldown / Cannot be installed at the same time as the Low-Low Attachment.
Please choose from four types of J-cups: "Standard J-cup," "Sandwich J-cup," "Roller J-cup," and "Kuzuryu Craft Roller J-cup."
Standard J-Cup
Sandwich J-Cup
Roller J-Cup
Kuzuryu Craft Roller J Cup
A simple and easy-to-use J-cup manufactured using precision bending processing using 8mm thick steel material. It is highly versatile and suitable for multipurpose use.
The J-cup is a sandwich-shaped cup with a core made of ultra-high molecular weight polyethylene. This protects the barbell's knurling and coating. It is highly versatile and suitable for multipurpose use.
J-cup with plastic rollers and metal bushings, You can easily adjust the position of the barbell from left to right. Bench press and squats, It is suitable for applications such as powerlifting competition practice.
This domestically produced stainless steel roller J cup looks beautiful and there's no need to worry about rust or paint peeling. Bench press and squats, It is suitable for applications such as powerlifting competition practice.
Standard J-Cup
A simple and easy-to-use J-cup manufactured using precision bending processing using 8mm thick steel material. It is highly versatile and suitable for multipurpose use.
Sandwich J-Cup
The J-cup is a sandwich-shaped cup with a core made of ultra-high molecular weight polyethylene. This protects the barbell's knurling and coating. It is highly versatile and suitable for multipurpose use.
Roller J-Cup
J-cup with plastic rollers and metal bushings, You can easily adjust the position of the barbell from left to right. Bench press and squats, It is suitable for use in powerlifting competition practice.
Kuzuryu Craft Roller J Cup
This domestically produced stainless steel roller J cup looks beautiful and there's no need to worry about rust or paint peeling. Bench press and squats, It is suitable for applications such as powerlifting competition practice.
Please choose from two types of safety: "Narrow Safety Arm 2.0 Magnetic Pin" or "Heavy Duty Safety Arm Magnetic Pin".
Narrow Safety Arm 2.0 Magnetic Pin
Heavy Duty Safety Arm Magnetic Pin
Narrow arm type safety arm to avoid contact with the plate during training, It is lightweight and has a compact vertical size. Recommended for use in private gyms and home gym environments. A magnetic pin for fixing is included.
Large safety arm with face saver. Its solid construction makes it suitable for use in harsh environments such as commercial or competitive gyms. A magnetic pin for fixing is included.
Narrow Safety Arm 2.0 Magnet Pin
Narrow arm type safety arm to avoid contact with the plate during training, It is lightweight and has a compact vertical size. Recommended for use in private gyms and home gym environments. A magnetic pin for fixing is included.
Heavy Duty Safety Arm Magnet Pin
Large safety arm with face saver. Its solid construction makes it suitable for use in harsh environments such as commercial or competitive gyms. A magnetic pin for fixing is included.
